5
On switching to the
high mode setting,
the airflow does not
increase OR there is
no airflow at all.
The outlet airflow is being blocked by
something.
Damage may have incurred within the
appliance.
Clean the outlet of anything blocking
it and wipe the outside surface with a
soft dry cloth.
Contact the customer service to
repair.
Product Specifications:
Rated Voltage: DC 12V
Rated Power: 1.5 - 1.8W
CADR (Air Flow): 12m3/h
Noise level: <49db
Removes >99% of air impurities (like dust, pollen, smoke, bad odors, mold and pet dander) within
20mins under 1m3 space
Unit Size: 5.8” (L) x 4.2” (W) x 2.4” (H)
Unit Weight: 11.2 oz
FCC Instructions
Changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the product.
NOTE: This product has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This product generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If the product does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures :
- Reorient or relocate the receiving antenna.
- Increase the separation between the product and receiver.
- Connect the product into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
