Nuvico Xcel TD-L800 Скачать руководство пользователя страница 84

Страница: 84 / 130

Alarm Management

DVR User Manual

②

Enable or disable “Record”, “Snapshot”, “Push”, “Alarm-out”, “Preset”, “Buzzer”,

“Pop-up Video” and “E-mail”. The alarm handling setting of object detection alarm is similar

to that of the sensor alarm (see 9.1 Sensor Alarm for details).

③

Click “Apply” to save the settings. You can click “Object Config” to go to the object

detection configuration interface.

9.3.2 Exception

Exception Configuration

①

Click Start



Settings



Camera



Intelligent Analytics



Exception to go to the following

interface.

②

Select the camera and enable the relevant detection as needed.

Scene Change

: Alarms will be triggered if the scene of the monitor video has changed.

Video Blurred

: Alarms will be triggered if the video becomes blurry.

Video Color Cast

: Alarms will be triggered if the video becomes obscured.

③

Set the sensitivity of the exception detection.

④

Click “Apply” to save the settings.

⑤

Click “Processing Mode” to go to the alarm handling configuration interface of exception

detection.

Exception Alarm Handling Configuration

①

Click Start



Settings



Alarm



Intelligence Alarm



Exception to go to the interface.

Содержание Xcel TD-L800



































































































































Результаты поиска

Содержание Xcel TD-L800

Отзывы:

Бренды по названию

Популярные бренды

Nuvico Xcel TD-L800, Руководство пользователя

Результаты поиска

Содержание Xcel TD-L800

Отзывы:

Бренды по названию

Популярные бренды