NCT-8ML-OV21AF
450043001389 A1
Mac Address
IP Address
Modify Network Parameter
Modify
CE :98 :23 :75 :35 :22
192
.
168
.
1
. 201
255
.
255
.
255
. 0
192
.
168
.
1
. 1
Subnet Mask
Gateway
For example, the IP address of your computer is 192.168.1.4. So
the IP address of
the camera sh
ould
be changed to 192.168.1.X. After modification, please enter the
password of the administrator and click “Modify” button to
modify the settings.
The default password of the administrator is “
123456
”.
④
Double-click the IP address to open up the web browser or you can directly enter
the IP address in the address bar of the web browser. Then follow directions
to
download the plug-in. After that, enter the user name and password in the login
interface to login.
The default username is
admin
; the default password is
123456
.
Transparent Dome Maintenance
Transparent dome is an optical element which is made of plastics. As dirt, dust or
fingerprints on the dome will reduce the clarity of the image, please keep it clean in the
course of installing or using but do not directly touch or wipe it. If there is any dirt or
dust, please follow these cleaning tips to clean your dome camera.
*
If there is dust on the dome, please use a dry soft brush to gently brush it .
*
If there is water or grease on the dome, please gently wipe off the water or grease with
a soft cloth. Then use another clean cloth with a little neutral detergent to wipe it
several times until it is clean. Finally, dry it with a soft cloth.
*
If there are fingerprints on the dome, please use a clean cotton cloth or lens cleaning wipe
with a little neutral detergent to wipe it several times and then dry it with a soft cloth.
Tips
Hold it
and
rotate
Rubber plug
Lower dome
⑤
Three-axis adjustment. Before adjustment, preview the view angle of the
camera on a monitor and then adjust the camera according to the figure
below to
get an optimum angle.
Rotation 0°~345°
Tilt 0°~77°
Pan 0°~345°
Zoom+
Zoom-
⑦
put the trim ring onto the lower dome and then rotate it clockwise until it is
locked. Finally, remove the protection film softly.
Install the lower dome back to the camera and fix it with screws. Then
⑥
Insert a micro SD card. Then adjust the image of the camera by
pressing T or
W button. Before adjustment, view the image of the
camera on a monitor.
Figure 3
Figure 5
Figure 4
Figure 6
①
②
Fix the junction box to the wall with screws.
Rotate the trim ring
counter-clockwise
to remove it from the camera and
then loosen the screws to open the lower dome (See Figure 1 and 3).
③
Route and connect these cables (take side conduit cabling for example). Then
fasten the camera to the junction box with screws.
④
⑤
Insert a micro SD card. Then adjust the view of angle and the image (See
Figure 4 and 5 ).
Install the lower dome back to the camera and fix it with screws. Then
put the trim ring onto the lower dome and then rotate it clockwise until it is
locked. Finally, remove the protection film softly. (See Figure
6)
Network Connection
5
•
Access the camera through Xcel IP Utility
MENU
IPC
Network Cable
Network Cable
Switch
Router
Computer
①
Make sure that the camera and the PC are connected via LAN.
②
Find the
Xcel IP Utility
from the CD and then install it in the computer.
After that, run the
Xcel IP Utility
as shown below.
Device
Network
Search
Immediate
Refresh
name
name
name
IPC
IPC
IPC
unknown
unknown
unknown
192.168.226.201
192.168.1.2
192.168.1.3
80
80
80
9008
9008
9008
255.255.
255.255.
255.255.
Modify Network Parameter
Mac Address
IP Address
Modify
CE :98 :23 :75 :35 :22
192
.
168
.
226
. 201
255
.
255
.
255
. 0
192
.
168
.
226
. 1
i
Tip: Enter the administrator password, and
then modify the network parameters.
Total Device: 3
Local IP Address:192
.
168
.
1
.
4
Subnet Mask:255
.
255
.
255
.
0 Gateway: 192
.
168
.
1
.
1
DNS
：
210
.
21
.
196
.
6
Device Name Device Type
IP Address
Http Port
Data Port
Subnet
Product Model
About
Subnet Mask
Gateway
Restore IPC Default Configuration
③
Modify the IP address. The default IP address of this camera is
192.168.226.201. Click the information of the camera listed in the above table
to show the network information on the right hand. Modify the IP address and
gateway of the camera and make sure
the
network address is in the same local
network segment as the computer. Please modify the IP address of your device
according to the practical situation.
Insert a micro SD card
* Install it when routing the cables
through the ceiling.
Note
:
Only some models support T/W button. If your camera doesn’t have these two
buttons, please skip the above zoom adjustment.
④
ceiling or wall with the screws provided.
Route and connect the cables. Then secure the camera to the
③
Loosen the screws to open the lower dome.
►
Install Camera with Junction Box
