④
Bracket adjustment. Before adjustment, preview the image of the camera
on a monitor and then loosen the fixed ring to adjust the view angle of the
camera.
90° Tilt
360° Pan
⑤
Focus and zoom adjustment ( If the model you get is fixed lens, please
skip this step). Remove the lens cover and then adjust the focus and zoom
screws to get a clear image. Finally, tighten these two screws and the lens
cover.
2
.
Overview
1
.
Package
After you receive your device, please check the following accessories.
The pictures here are for reference only.
1
3
.
Installation
Please make sure that the wall or ceiling is strong enough to withstand 3
times the weight of the camera. Please install and use the camera in the dry
environment. You'd better install back the lens cover less than 4 hours after
removing it.
①
Drill the screw holes and the cable hole on the wall according to the
drill template.
②
Route the cables and connect the relevant cable.
③
Secure the mounting base with camera to the wall with screws.
2
3
5
4
6
Fixed
Ring
Network Cable
Power Cable
CVBS Cable
MIC IN Cable
Mounting Base
NCT-4M-B2 Bullet Camera
Quick Start Guide
1
3
2
4
2
1
3
►
Network
Cable
Connection
►
Water-proof Cap Mounting
►
Video
Connection
►
Audio
Connection
►
Power
Connection
1 2
3
4
5
6
DC12V
Router
Computer
Modem
Internet
Network
Cable
Network
Cable
Network
Cable
Monitor
Camera
CD
Drill Template
Screws
Water-proof
Cap
Quick Start
Guide
