REMINDE
R
Do not aim the camera directly into the sun.
1. Lens
2. P
ower Input Connector
12VDC/24VAC Dual Voltage
3. V
ideo Output Connector - BNC
4.
S
er
vice Monitor Output Connector
Use Cable CA-SMC30.
5. Camera Control Board
6.
Safety Wire
7.
Bubbl
e
8.
Dome Cover Ring
9. F
lush Mount Bas
e
10.
Surface Mount Plate
11.
Assembly Screw
s
Philips M4x9(Indoor), Torx M4x9(Vandalproof)
12.
Assembly Screw
s
Philips ST4x12(Indoor), Philips M4x10(Vandalproof)
13.
Mounting Screw
s
Philips ST4x30(Indoor & Vandalproof)
9
4
5
8
6
1
7
12
11
10
13
3
2
26.2
ø5.0
ø1
5
ø5 0
11
2
70
109
ST4x30
ST4x12 or M4x10
Surface Mount
Sur
fa
ce Mount T
emplate
F
lush Mount T
emplate
Plastic Dowels
Plastic Anchors
Flush Mount
ST4x30
A
A'
1
2
3
Philips M4x9 or
Torx M4x9
1.
Remove dome cover by loosening 3 screws. For indoor domes, use standard Philips
screw driver. For vandalproof domes, use Torx wrench provided with the package.
2.
Surface Mount
:
Using four ST4x30 screws, mount surface plate to a sturdy surface Using three
ST4x12(Indoor) screws or M4x10(Vandalproof) screws, affix flush mount base to
surface plate.(For flush mount application, disregard this section)
3.
Flush Mount
:
Using four ST4x30 screws, affix flush mount base to a sturdy surface
