Appendix B: Changing the Nuvation Energy BMS
Network Configuration
BMS Network Configuration
Overview
Nuvation Energy BMS is flexible and allows changing its network configuration if you need the IP
address of Nuvation Energy BMS to match your existing network settings.
Improperly modifying the network settings can result in a Nuvation Energy BMS that
cannot communicate over Ethernet.
Be sure to record the updated IP address, netmask, and gateway settings if you
decide to make changes to these settings.
Modifying the Network Settings
1. Unlock the Operator Interface by clicking the menu and
Unlock
2. From the menu, select
Registers
to bring up the register browser page
3. Under the
Manual Register Configuration
panel, expand the row for Component Name
sc_ethernet
. The
sc_ethernet
component contains network settings like IP address, gateway, etc.
Use the find feature (
Ctrl + F
) in your browser to locate components in the page
4. Click the
Edit
button on the register you need to modify to meet your desired network
configuration. This will bring up the
Edit Register
dialog box
5. Enter the desired value for the register. Then click
Write
The index field may be left blank for all operations.
6. Confirm that the value has been updated by clicking
Read
7. Under the
Manual Register Configuration
panel, expand the row for component name
Nuvation Energy Stack Switchgear - Product Manual
Document ID: NE-PM-003
86
Rev 1.0, 2020-09-03
