NUVA PIPA lite, Руководство пользователя

Страница: 14 / 45

13 12
PIPA lite series instructions
PIPA lite series instructions
Installation concerns
DO NOT install this infant child restraint on
vehicle seats with 2-Point Retractor Safety Belts
with the Base. (6)
This infant child restraint is suitable for vehicle
seats with a 3-point Retractor Safety Belt with the
Base (7) , or ISOFIX anchor points WITH the Base.
(8)
DO NOT place rear-facing child restraint on
front seat with air bag. Death or serious injury
may occur. (9) Please reference vehicle owner’s
manual for more information.
DO NOT install this infant child restraint on
vehicle seats that face sideways or rearward with
respect to the moving direction of the vehicle. (10)
It is recommended to install this infant child
restraint on the rear vehicle seat. (11)
DO NOT install this infant child restraint on
vehicle seats unstable during installation.
Product Overview
Canopy
1
- To attach the canopy, snap the canopy to the
canopy mount on both sides. (1)
2
- To open the canopy, pull the canopy toward the
front of the seat, and to close the canopy, push it
back.
3
- To remove the canopy, reverse step 1. Then
unsnap the seat pad from the shell and lift fabric
up. (2)
4
- Press the canopy release button (3)-1 and pull
canopy through the fabric slot. (3)-2
Repeat on opposite side.
Seat Pad
1
- Open the snaps on both sides of the seat. (4)
2
- Press the red button to disengage the buckle.
Remove the body support.
3
- Remove the seat pad. (5)