@ Bluetooth Status LED C)"
This is a small LED next to the On/Off switch that illuminates to show the current status of the Wake's Bluetooth connection.
•
Flashing Slowly and Intermittently: The Wake is on and is not in pairing mode. This is also the indicator for
"auto-reconnect': where the Wake attempts to connect with the last paired Bluetooth device immediately after it
is powered on.
•
Flashing Quickly and Steadily: Pairing mode.
•
Solidly Lit: Paired and connected.
@ On/Off Button
0
On: Press and hold the
0
button for~ 3 seconds to turn the NUU Wake on. You will hear a two-tone (low-high) sound,
indicating that the speaker is on.
Off: Press and hold the
0
button for~ 3 seconds to turn the NUU Wake off. You will hear a two-tone (high-low) sound,
indicating that the speaker has been switched off.
Auto-off: After 30 minutes of inactivity, the NUU Wake will shut off automatically. To turn the Wake on again, Press and
hold the
0
button for ~3 seconds. The NUU Wake will not automatically shut off if you are playing audio through
Bluetooth, 3.5mm connection, or are charging a device with the USB port.
NOTE: The Bluetooth Status LEDC)
0
will light when the Wake is on, and go dark when it is off.
4
