CARE AND MAINTENANCE
Follow the instruction for the material of your special product to make
sure that it stays in the best shape for as long as possible.The informa-
tion below is only intended as a general guideline. For more information,
please contact us.
• Only need to rinse it thoroughly with clean water to wash away dirt and
grime. Never use abrasive cleansers on the furniture, since it can attack
the surfaces and leave behind scratch marks.
• For the stubborn grime and stains, just use a soft sponge and mild
soapy water and then dry it with a cloth or paper towel.
• Check the stability of the screws, nuts and nut caps prior to each use.
Tighten up them after one to two month’s use whenever required.
• Avoid improper use, and be careful not to scratch or damage the
surface with sharp objects.
• When you move your furniture, make sure you lift it rather than pulling
or pushing it to avoid damaging the foor, legs and mounting.
Note:Please do not tighten any bolt until all bolts have been put into right place.
If you tighten one bolt, it maybe cause other bolts out of position.
Attach fix ring (C) together using 8 washers (E) and 8 bolts(D), Do not screw down.
Upon completion of full assembly and bolted up-all screws can be tightened down.
9
10
