ASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS
Step 1: Connect 4 side panels (B, C, D, E) by Allen wrench (H0),
and tighten with washers(L15) and bolts(J35) .
Step 2: Attach the tank base (F) to the side panel(D) and side
panel(E) by Allen wrench (H0), and tighten with washers(L15) and
bolts(J30) .
Step 3: Attach the support bar(I) to the side panel(D) and side
panel(E) by Allen wrench (H0), and tighten with bolts(J18) .
Step 4: Attach the table top(A) to the 4 side panels by Allen wrench
(H0), and tighten with washers(L15) and bolts(J18) .
Step 5: Place lava rocks(H) in the burner bowl; place gas hose
through a hook; place the lid(G) over the burner bowl.
Step 6: Insert a battery(AAA battery
,
sold separately) and knob into
the electric igniter and twist the button cover on to igniter housing.
Do not overtighten.
WARNING: Batteries may contain mercury. Do not put batteries into
the fire or trash. Please treat batteries as hazardous waste and
recycle properly.
Note: Please do not tighten any bolt until all bolts have been put into right place. If you tighten one bolt, it maybe cause other
bolts out of position.
Note: Please do not tighten any bolt until all bolts have been put into right place. If you tighten one bolt, it maybe cause other
bolts out of position.