Nutzen NCC-2200, Инструкция по эксплуатации

Страница: 13 / 16

13
5.Functional description and technical requirements
1. Boot:
When the electric ceramic cooker is powered on, the buzzer makes a long sound, all
the indicator lights and the LED are on for 1 second, and then automatically enter the
standby state. Under the standby state, the "on / off" indicator lamp and the "OFF " "in
the middle of the four-digit LED flicker. After pressing the "on / off" button in standby
state, the "on / off" indicator light and the four-digit LED "-" are always on, enter the
standby state, and the fan starts to work. At this time select the function key, Infrared
cooker into the corresponding function work.
2.
keys and display instructions:
a. In the Standby state of the four-digit LED display "OFF ", except" on / off "key, the
other keys cannot work; in standby state press" on / off key into standby state,
each valid button, will produce the corresponding action, and accompanied by a
buzzer.
b. On/off key: After pressing the "on / off" key, enter the standby state, press the
corresponding function key to enter the corresponding function work within 1
minute, the "on / off" indicator light and the corresponding function indicator light,
With a buzzer , the electric ceramic cooker enters the working state. At any time
in the working state, just press the "on / off" button to make the electric pottery
furnace stop heating and enter the standby state.
3. “+” key: In the working state, turn the knob to the right, increase the power or
temperature by 1 level until the maximum power or temperature; in the timing
function setting state, increase the timing to the right by 1 minute in turn.
4. "-" key: In the working state, turn the knob to the left, the power or temperature
is reduced by 1 level until the power or temperature is minimum; in the timing
function setting state, turn left to the left, The timing is reduced by 1 minute in
turn.
5. "Timer" key: At work: press the "timing" key, enter the timing setting state, the
initial default timing 00:00 minutes," the “timer" indicator light up, LED display
"00:00”, flicker. Press the Timer button for the second time to exit the timing state,
and the timing indicator lights out. Time limit:"00:00-3:00"
Timing process:
a. In the Timer state, turn the knob key left/right, to set time reduced/added by 1
minute. Timing time flashes 5 seconds in the LED to set time, then countdown
shows the set time, in the timing countdown state, press the "Timer" key again,
can cancel the timer state, return to the current working state.
b. If timer is set, the LED alternately displays the remaining time and the current
working level at 5 seconds frequency. After the countdown, the buzzer rings,
stops heating, returns to standby state, and the fan delays until the glass
temperature ≤50
℃
.