Install and remove
float valve.
When pressure builds up inside your
cooker, the float valve pops up. This
indicates the cooker is pressurized
and prevents you from opening the
lid. When the cooker is depressurized,
the float valve drops down.
Note:
Refer to
Venting
methods section of
this user guide to safely release pressure.
Remove:
Place one finger on top of
the float valve (located in the upper
part of the lid) and turn lid over.
Detach the silicone cap from the float
valve and remove float valve from
top of lid.
Note:
Always keep the float valve and
silicone cap in a secure place after
removing from the lid.
Clean float valve
to remove dried food debris after every
use to avoid clogging. The float valve and
silicone cap must be installed in the lid
before operating your cooker.
Install:
Insert float valve on the hole
located on top of the lid. Place one
finger on the float valve and turn lid
over. On the bottom of lid, attach the
silicone cap to the float valve.
Note:
The float valve and silicone cap must
be installed in the lid before operating your
cooker.
Warning:
Never touch the float valve
while the cooker is pressurized to avoid burns.
Install and remove
anti-block shield
The anti-block shield safely prevents
food from entering the pressure
release hole to avoid blockage and
assist in proper pressure regulation.
Remove:
Grip lid and firmly press
against side of anti-block shield,
pressing towards side of lid and up
direction until it pops off.
Note:
The anti-block shield must be
cleaned frequently to remove dried food
debris.
Install:
Place anti-block shield over
prongs and press down until it snaps
into position.
Note:
Always make sure the anti-
blockshield is assembled in the lid before
using your cooker.
25
24
