NUTRICHEF PKCWC, Руководство пользователя

Страница: 12 / 14

www.NutriChefKitchen.com
12
V. INSTRUCTION
Note:
•
Position your wine cooler so that the plug is accessible
•
Keep your wine cooler out of direct sunlight.
•
Do not place next to heat generating appliance.
•
Place the wine cooler on a leveled surface that is strong enough to support the unit when it is fully
loaded. To level your wine cooler, adjust the front feet located at the bottom of the unit.
IMPORTANT:
•
Position the cooler in a dry and airy place with ambient temperature between 5-32°C (41-90°F).
•
Before connecting the unit to a power source, allow it stand upright for approximately 2 hours.
This will reduce the possibility of any system malfunctions which may have occurred from handing
during transportation.
•
When positioning the wine cooler, 6 inches of space at the back and 10 inches of space both sides are
suggested. Do not put any objects on top of the unit which may block the air circulation.
POWER CONNECTION:
•
This wine cooler should be properly grounded for your safety and in order to minimize the possibility of
electrical shock, the power cord of this unit is equipped with a 3-pin plug which fits with 3-pin wall
outlets.
•
Never cut or remove the ground wire from the supplied power cord.
•
The use of extension cords is not recommended.
•
This unit requires a standard 110V-60Hz electrical outlet with a 3-pin plug.
•
The cord should be secured behind the wine cooler. Also, to prevent accidental injury, do not expose or
dangle the cord.
VI. VENTILATION
•
Do not install the wine cooler in a closed cabinet without proper ventilation.
•
Please leave at least 6 inches distance between the wall and the wine cooler.
•
Do not remove the feet of the wine cooler. Keep at least 50mm of ground clearance.
VII. CLEANING
•
UNPLUG the Wine Chiller, and remove all items including shelves.
•
Wash the inside surfaces with a warm water and baking soda solution.
The solution should be about 2 tablespoons of baking soda to a quart of water.
•
Wash the shelves with a mild detergent solution.
•
Wring excess water out of the sponge or cloth when cleaning area of the controls, or any electrical parts.
•
Wash the outside cabinet with warm water and mild liquid detergent.
Rinse well and wipe dry with a clean soft cloth.