NUTRICHEF PKAIRFR75, Руководство пользователя

Страница: 12 / 14

www.NutriChefKitchen.com
12
Chapter VI Troubleshooting Guide
Air fryer does not work
The appliance is not plugged in
Insert the plug into an appropriate
grounded power socket
Did not start Start operation control panel
The ingredients fried in
the fryer are not
completely cooked
Too many ingredients were used Place ingredients by batch into the
fry basket
The cooking temperature is too low Set temperature control button at
required temperature
The cooking time is too short
To fry for a longer time
The food is fried unevenly While cooking without stirring Need ideal stirring
Fried snacks are not crisp Used not the traditional
ingredients
Use snacks designed to be baked in
a traditional oven, or lightly brush
some olive onto the snacks
Cannot slide the frying
basket into the appliance
properly
Frying basket handle is not placed
correctly
Install frying basket properly, adjust
the height of foods, place
ingredients according to required
capacity
There are ingredients in air fryer
There are too much food in frying
basket cannot close
White smoke is coming
out of the product
You are frying greasy foods
It is normal when you are preparing
greasy ingredients in air fryer, large
amounts of oil can smoke
The pan contains greasy residue
from previous uses
Make sure you clean the frying pan
properly after each use
Stirring blade not working
Stirring blade was not properly
constructed with synchronous
motor
Press button, reconstruct it
Stirring function not started Check the status of stirring function
The baked ingredients is too large,
stirring blade blocked
Adjust the size of ingredients, start
again
Display screen shows”E01” Temperature sensor open ended
Contact customer service center or
come to local special shop for
maintenance
Display screen shows”E02” Temperature sensor short circuit
Contact customer service center or
come to local special shop for
maintenance
When finish or cancel, fan
not stop timely
Fan with 45 seconds time lapse
shut down to protect machine
It is normal, after 45 seconds fan will
be shut down automatically
Problem Possible Cause(s) Resolution(s)