NUTRIBULLET Smart Touch Blender Скачать руководство пользователя страница 5

Страница: 5 / 27

is unplugged, and the thermal

breaker cools down sufficiently.

• This appliance has important

markings on the plug. The

attachment plug or entire

cord set is not suitable for

replacement. If damaged, the

appliance will be replaced.

STOVE-TOP

HEATING SAFETY

To heat items that have

been blended at room

temperature or cooler

(21°C/70°F or less), transfer

mixture to a stove top

pot to heat. Always use a

thermometer to test the

internal temperature of

cooked ingredients; they may

feel cool to the touch, yet still

be hot inside.
The NutriBullet

Smart Touch

Blender™ is not intended for

use on the stove top. Do not

place the motor base or any

NutriBullet

accessory on the

stove or immerse in boiling

water. This may result in

damage to the accessory.

• Do not place any of the

NutriBullet

Smart Touch

Blender™ parts in a

microwave, oven, in a stove

top pot, or immerse in boiling

water, as this may result in

damage to the part.

• Do not place on or near a hot

gas or electric burner, or in a

heated oven.

cord, plug, or motor base of

the NutriBullet

in water or

other liquids. Discontinue

use if the cord, plug, or

motor base is damaged.

• Always

POWER OFF

and

UNPLUG

the NutriBullet

Smart Touch Blender™ when

it is not in use or

BEFORE

assembling, disassembling,

changing accessories, or

cleaning. Do not attempt to

handle the NutriBullet

Smart

Touch Blender™ until all parts

have stopped moving.

• To unplug, grasp the plug and

pull from the outlet. Never pull

from the power cord.

•

Do not let cord hang over

edge of table or counter,

or touch hot surfaces.

not pull, twist, or damage the

power cord. Do not allow the

cord to touch hot surfaces,

including the stove.

• The Smart Touch Blender™

is ready to operate when

unit is plugged in and power

icon is illuminated. Avoid

inadvertent contact with the

touch screen display.

• If the motor stops working,

unplug the motor base and let

it cool for at least 15 minutes

before attempting to use

it again. Your NutriBullet

Smart Touch Blender™ has

an internal thermal breaker

that shuts off the motor when

it overheats. The thermal

breaker will reset when the unit

ING!

Содержание Smart Touch Blender




























Результаты поиска

Содержание Smart Touch Blender

Отзывы:

Бренды по названию

Популярные бренды

NUTRIBULLET Smart Touch Blender, Руководство пользователя

Результаты поиска

Содержание Smart Touch Blender

Отзывы:

Бренды по названию

Популярные бренды