10
11
ninjakitchen.com
BEFORE FIRST USE
USING THE CONTROL PANEL
IMPORTANT:
Review all warnings
on pages 4-7 before proceeding.
DID YOU KNOW?
• You can take your drinks on the go
using the spout lids.
• The cups, blade assembly, and lids are
BPA free and dishwasher safe.
MANUAL SETTINGS:
START | STOP
Press once to start continuous
running; press again to stop.
Timer counts up by seconds,
up to 60 seconds.
PULSE
Runs only while pressed down.
Short presses create short pulses.
Timer counts up by seconds as
long as button is pressed down.
AUTO-IQ PROGRAMS:
AUTO-IQ SMOOTHIE
Make super-smooth, sippable drinks
and shakes from fresh or frozen
fruit, milk, liquids, and ice.
AUTO-IQ EXTRACT
Ideal for tough, leafy, or fibrous
whole fruits and vegetables,
including their skins, seeds,
and stems.
AUTO-IQ® PROGRAMS FOR THE SINGLE-SERVE FRESHVAC™ CUP
Intelligent pre-set programs combine unique blending and pausing patterns
that do the work for you. Once a pre-set program is selected, it will start
immediately. Press the selected program again to pause it.
NOTE:
Handle the Pro Extractor Blades®
Assembly by grasping around the
perimeter of the blade assembly base.
INSTALLING THE BATTERIES
1
Unscrew the FreshVac™ Pump’s
power button cap and remove the
spring-loaded battery cover.
2
Install 6 AA alkaline batteries
(included), ensuring the +/-
symbols on the batteries match
the markings on the battery cover
and battery housing.
3
Replace the battery cover, making
sure it is fully seated and clicked
in place.
4
Screw on the pump’s power
button cap.
USING AN OPTIONAL
AC ADAPTER
If you prefer to power your FreshVac
pump using a AC Adapter, you may
purchase one on ninjaaccessories.com.
1
Insert the small round end of the
AC power cord into the jack on
the pump.
2
Insert the 2-pronged plug of the AC
cord into an electrical outlet.
1
Remove all packaging materials
from the appliance. Exercise care
when unpacking blade assembly.
The blade assembly is sharp.
2
Wash cups, lids, and blade assembly
in warm, soapy water using a
dishwashing utensil with a handle to
avoid direct contact with the blades.
Exercise care when handling blade
assembly, as the blades are sharp.
3
Thoroughly rinse and air-dry all parts.
4
Wipe touchscreen with a soft,
damp cloth. Allow it to dry
completely before using.
NOTE:
If the battery cover and power
button cap are not properly installed
or tightly in place, the pump will
not function.
NOTE:
Use only an optional AC
adapter manufactured by SharkNinja.
Other after-market adapters are not
compatible with the FreshVac pump.
NOTE:
All attachments are dishwasher
safe. It is recommended that the
cups, lids, twist-off reservoir, and
blade assembly be placed on the
top rack of the dishwasher. Ensure
blade assembly and lid are removed
from the cup before placing in the
dishwasher. Exercise care when
handling blade assembly.
