Nutri Ninja BL450NZ, Руководство пользователя

Страница: 9 / 16

9 CUSTOMER CARE - AU: 1800 890 840
1 Review warning and caution statements above before
proceeding to number 2.
2 Place the motor base on a clean, dry, level surface such
as a counter or tabletop.
3
Make sure that the motor base is plugged in for use.
4 Add ingredients to the cup.
NOTE:
Do not overfill! To avoid spilling, do not add
ingredients past the “MAX” fill line.
5 Place the Pro Extractor Blades Assembly onto the cup
and twist it on tightly until you have a good seal.
(Fig. 1)
6 Turn the cup upside down and place it onto the motor
base, aligning the tabs on the cup with the motor base.
Turn it clockwise, the unit is ready for use.
(Fig. 2)
7
Press down on the top of the cup in short intervals to
activate. (Fig. 3)
8
When you have reached your desired consistency, stop
the appliance by removing your hand from the cup.
Use of the Nutri Ninja
®
Cups
9 To remove the cup, ensure that the motor has stopped
running. Then turn the cup anticlockwise
(Fig. 4)
and
pull straight up to remove. (Fig. 5)
10
Turn the cup upright and remove the Pro Extractor
Blades Assembly by twisting the Pro Extractor Blades
Assembly anticlockwise.
(Fig. 6)
11 Do not store blended contents with the Pro Extractor
Blades Assembly attached.
12
Place the Sip & Seal Lid onto the Nutri Ninja Cup, twist
to seal and enjoy.
13
For storage, only use Sip & Seal Lid to cover.
14 Be sure to store the Pro Extractor Blades Assembly
attached to an empty cup when not in use.
15
Make sure that the motor base is unplugged when not
in use.
16
To remove the motor base unit, tip the unit forward
from the rear to easily disengage the suction cups.
Fig. 3 Fig. 4 Fig. 5
ASSEMBLY PULSE REMOVAL
Fig. 2 Fig. 1
or or
Fig. 6
or or
WARNING: Handle the Pro Extractor Blades
™
Assembly with care, as the blades are sharp.
WARNING: Remove utensils prior to processing. Failure to remove may cause the Nutri Ninja Cup to be
damaged or to shatter, which may cause personal injury.
WARNING: Never leave the appliance unattended while in use.
CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the
user being burned.
CAUTION: Remove the Pro Extractor Blades Assembly from the cup upon completion of blending. Do not store
ingredients before or after blending in the Nutri Ninja
®
Cup with the blade assembly attached. Some foods may
contain active ingredients or release gases which will expand if left in a sealed container, resulting in excessive
pressure buildup that can pose a risk of injury. For storage, only use Sip & Seal
™
Lid to cover.
IMPORTANT: Make sure that the motor base is plugged in for use.
For best results, use short “
PULSES
”!