NuTone RDM2, Руководство по установке

Страница: 5 / 20

RDM2 Installation Guide Page 5
Install Grille
FOR FAN MODELS WITHOUT LIGHTS
22. Squeeze
GRILLE SPRINGS (P)
and slide into tabs on the
radiation damper frame. Push
GRILLE (Q)
until it’s tight
against ceiling surface.
23. Follow instructions packed with the fan to finish the
installation.
FOR FAN MODELS WITH LIGHTS
22. Attach connector from the WIRE HARNESS (B) to mating
connector from the grille.
23. Squeeze
GRILLE SPRINGS (P)
and slide into tabs on the
radiation damper frame. Push
GRILLE (Q)
until it’s tight
against ceiling surface.
24. Follow instructions packed with the fan to finish the
installation.
REMOVE THE MASK BEFORE INSTALLING GRILLE OR
OPERATING FAN.
Install Mask, Finish Ceiling and
Install Plaster Supports
20. Install
CORRUGATED MASK (N)
supplied with the fan to
protect unit from drywall spray, construction dust, etc.
21. Finish the ceiling around radiation damper opening. Ceiling
opening must be no larger than the outside of the radiation
damper.
N
P
Q
Q
P
B