16
Deactivating the Control of Radio/CD
from Remote Stations
REMOTE CONTROL OF RADIO ON/OFF (Deactivating)
The master station is shipped with the remote control of the
Radio ON/OFF enabled
.
This allows the radio to be turned on and off from the remote stations. To change the
status of this control mode, perform the following steps.
1. Select the master to
PROGRAM OFF
mode and end any intercom call by pressing
END CALL
.
2. Press and hold the
END CALL
key at the master station.
3. While holding the
END CALL
key, press
MEMORY CHANNEL 1
. The display will
read
“rAd”
and the
ON
display will be lit.
4. To change the station of this control function to
OFF
, press the
MEMORY CHANNEL
1
key again. The display will now change to
OFF
, and the remote radio ON/OFF
function will not operate from the remote stations.
5. To change the status back to the ON mode, repeat steps 1 through 4.
REMOTE CONTROL OF RADIO TUNING (Deactivating)
To deactivate this feature, perform the following steps:
1. Select the master to
PROGRAM OFF
mode and end any intercom call by pressing
END CALL
.
2. Press and hold the
END CALL
key at the master station.
3. While holding the
END CALL
key, press
MEMORY CHANNEL 2.
The display will
read
“tunE”
and the
ON
display will light.
4. To change the status of this control function to
OFF
, press the
MEMORY CHANNEL
2
key again. The display will now change to
OFF
, and the remote radio tuning
function will not operate from the remote stations.
5. To change the status back to the ON mode, repeat steps 1 through 4.
REMOTE CONTROL OF CD PLAYER ON AND OFF (Deactivating)
To deactivate this feature, perform the following steps:
1. Select the master to
PROGRAM OFF
mode and end any intercom call by pressing
END CALL
.
2. Press and hold the
END CALL
key at the master station.
3. While holding the
END CALL
key, press
MEMORY CHANNEL 3
. The display will
read
“cd”
and the
ON
display will light.
4. To change the status of this control function to
OFF
, press the
MEMORY CHANNEL
3
key again. The display will now change to
OFF
, and the remote CD ON/OFF
function will not operate from the remote stations.
5. To change the status back to the ON mode, repeat steps 1 through 4.
REMOTE CONTROL OF CD TRACK ADVANCE (Deactivating)
To deactivate this feature, perform the following steps:
1. Select the master to
PROGRAM OFF
mode and end any intercom call by pressing
END CALL
.
2. Press and hold the
END CALL
key at the master station.
3. While holding the
END CALL
key, press
MEMORY CHANNEL 4
. The display will
read
“trAC”
and the
ON
display will light.
4. To change the status of this control function to
OFF
, press the
MEMORY
CHANNEL 4
key again. The display will now change to
OFF
, and the remote CD
track advance function will not operate from the remote stations.
5. To change the status back to the ON mode, repeat steps 1 through 4.
MASTER ST
A
TION CONTR
OLS
5
1
2
3
4
5
6
7
8
9
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
31
32
33
30
10
SCAN:
Activ
ates scan tuning dur
ing AM/FM oper
ation.
(pg.
7)
▲▼
UP/DO
WN TUNING:
Pro
vides man
ual tuning of the AM/FM r
adio
.(pg.
7)
MEMOR
Y 1-6 KEYS:
Pro
vides direct access to stored r
adio frequencies
.
(pg.
7)
TRA
C
K
:
Retur
ns to the beginning of the current tr
ac
k and/or pre
vious tr
ac
ks
.
(pg.
8)
TRA
C
K
:
Adv
ances the CD Pla
yer to the beginning of the ne
xt tr
ac
k.
(pg.
8)
RDM/RPT
:
(Random/Repeat) Set the CD pla
y mode to:
REPEA
T ONE, REPEA
T
ALL or RANDOM PLA
Y
.(pg.
9,10)
PLA
Y/P
A
USE:
Activ
ates the oper
ation of the CD Pla
ye
r.
Pressing the k
e
y dur
ing
pla
y oper
ation will pause the CD Pla
ye
r.
(pg.
8)
SEARCH
:
Quic
kly searches the tr
ac
k in the f
orw
ard direction.
(pg.
8)
SEARCH
:
Quic
kly searches the tr
ac
k in the re
verse direction.
(pg.
8)
CD PLA
YER DOOR:
Open CD door and snap CD disc onto spindle
.(pg.
8)
TIME SET
:
Used with the
▲▼
ke
ys to set the cloc
k and timer
.
(pg.6)
MEMOR
Y SET
:
Stores desired r
adio frequencies into a selected memor
y
location.
(pg.7)
CLOSE:
Press here to close CD Pla
yer door
.(pg.8)
TREBLE:
Adjusts the high frequency audio content of the source audio
.
(pg.
13)
ST
OP:
Ends the CD Pla
y mode and tur
ns off the prog
ram audio
.(pg.
9)
B
ASS:
Adjusts the lo
w frequency audio content of the source audio
.(pg.13)
SYSTEM V
OLUME:
Adjusts the prog
ram audio le
vel throughout the system.
(pg.
13)
OPEN:
Causes the CD Pla
yer door to open.
(pg.
8,9)
LOUDNESS:
Compensates f
or the bass and treb
le response the human ear
has when listening to audio at lo
w v
olume le
vels
.(pg.13)
MICR
OPR
OCESSOR RESET
:
Initiates a reset of the microprocessor
.
NO
TE:
A reset of the micr
opr
ocessor will erase the system’
s
memor
y.
DISPLA
Y
:
Sets the LCD displa
y mode:
CLOCK, RADIO FREQ
UENCY
,
TRA
CK NUMBER or
TIME PLA
YED
.(pg.
9,10)
INTERCOM V
OLUME:
Adjusts intercom audio le
vel throughout the system.
(pg.
15)
MASTER ST
A
T
ION ST
A
TUS SWITCHES:
Sets the master station in one of the
follo
wing modes:
RADIO/INTERCOM, INTERCOM ONL
Y
, OFF or MONIT
OR.
(pg.13,14)
REMO
TE ST
A
T
ION ST
A
TUS SWITCHES:
Sets the remote stations in one
of the
follo
wing modes:
RADIO/INTERCOM, INTERCOM ONL
Y
, OFF or MONIT
OR.
Note:
If the optional e
xpansion module is installed,
6 ad
ditional s
witc
hes will
be located on the right side of the master
.
(pg.13,14)
DOOR RELEASE KNOCK
OUT
:
Mounting hole f
or optional door release
pushb
utton.
(pg.
17)
END CALL:
Ends intercom comm
unication and retur
ns system to audio
source
.(pg.
15)
DOOR T
ALK:
Initiates intercom comm
unication to the door speak
ers
.(pg.15)
INSIDE/P
A
TIO:
Initiates intercom comm
unication to remote stations
.(pg.14)
TIMER:
Enab
les or disab
les the r
adio timer
.The indicator light will illuminate ne
xt
to the
Timer k
e
y when the Radio
Timer is activ
ated.
(pg.
6,7)
PR
OGRAM A
UDIO SOURCE:
Selects the prog
ram audio source:
AM, FM,
TAPE
and A
UX.
The indicator light will illuminate ne
xt to the selected prog
ram audio
source
.(pg.
7,13)
ELECTR
ONIC CHIME
TUNE SELECTION:
Selects the tune of the optional
NuT
one IA-29 Chime Module
.
PR
OGRAM OFF
:T
ur
ns off the selected prog
ram audio source
.T
he prog
ram Off
ke
y does not aff
ect the intercom or chime oper
ation.
(pg.
7,13)
MASTER V
OLUME:
Adjusts the v
olume at the master station.
(pg.
7,13,14)
▲
▲
▲
▲
