Operating Instruction and Documentation
2.60 HL SST
- 18 -
• Move the Dip switch Dip 5 to the “on” Position (regulation on).
• Press the button “lowering” until the lift reaches the lowest position so that a reset can
then be carried out (see chapter “Reset after an emergency lowering”)
• Remount the covers.
Pic 4:
6. Troubleshooting
If the lift does not work properly, the reason might be quite simple. Please check
the lift for the potential reasons mentioned on the following pages. If the cause of
trouble still cannot be found, please call technical service.
Problem: Motor starts, lift does not lift!
Potential causes:
The vehicle is too heavy
Level of the oil is too low
The emergency lowering screws are not closed
Hydraulic valve is defective
Gear pump is defective
solution:
unload the vehicle
check the oil level, fill with hydraulic
oil as required
Check the emergency lowering
screw
Call technical service
Call technical service
Problem: Motor does not start!
Potential causes:
No power supply
Main switch is not engaged
The main switch is defective
Fuse defective
The feed line is cut
Thermal switch in the motor is active
The lifting carriages are not within the control limits
(window)
Motor is defective
solution:
Check the power supply
Check the main switch
Check the main switch
Check Fuse
Check the complete cable
Let motor cool down
Read chapter 5.3
Call technical service
Over ride switch (S6)
DIP switches
Содержание 2.60 HL SST
