Call-pick function
When speakers is connected to your smart phone
(blue LED lit continuously), whenever there is an
incoming call ring, you can press [play ] button
once on the speakers to pick up and use it as
speaker phone. (Press and hold [play ] 2 sec.
will switch the call to your smart phone).
How to Use / Controls
Adjust volume: during music playback or call,
press [+] to increase speaker volume, or [-] to
reduce speaker volume. You can press once or
multiple times, or press and hold until adjust
volume to desire level.
During music playback, press [next ] will forward
to play next track; press [prev ] will backward to
previous track.
Press [play ] once will pause
playback, press again to resume play.
If battery power becomes low, there will be some
beeping alert sound and LED flashes RED and
BLUE quickly (8 times every sec., Red light
interval every 4 sec.). Then charge the speakers
as mentioned in above section. (You can play
music at the same time while charging the built-in
battery.)
You can use the AUX 3.5mm audio cable
connection to smart phones or other player
devices for music playback (fig.4). Whenever you
plug in the AUX port, the Bluetooth connection will
be powered off. You can still press [+] to increase
speaker volume, or [-] to reduce speaker volume
for convenient operation. (You will need to operate
the smart phone to resume music playback when
you disconnect the AUX cable and use it wireless
again.)
EN
INSTRUCTION MANUAL
Pairing the speaker (manually)- if your phone is
NOT NFC enabled
a.) When casing is opened, power is auto ON
with in 3 sec. and LED indicates blue on front. For
first time use, the blue LED will be flashing fast (8
times every sec.) to show it is ready for pairing.
Browse your smart phone Bluetooth device list
found, and select the one named
“NUSOUND(NU-006)” to confirm pairing on your
smart phone. You will hear a beep tone on the
speakers which is sent from your phone, and then
the speakers' blue LED flashes steadily (1.5 times
every sec.). Pairing connection is successful then.
b.) When you need to disconnect the speaker,
you first switch off Bluetooth function on your smart
phone, the speakers' blue LED will flash slowly (1
time every sec.). Then you switch OFF (press to
close) the speakers, the pairing memory will be
then kept there.
Next time when you press and open ON the
speakers, it will automatically connect to your
smart phone again and blue LED lit continuously
(when your smart phone's Bluetooth function is
also ON and nearby <5M).
c.) If you need to pair the speakers with a new
smart phone, switch off Bluetooth function on
your old smart phone first. Then power on your
new smart phone's Bluetooth function. After
that switch off and re-open to power on the
speakers (or press and hold [play ] button
for 3 sec.) until the speakers' blue LED will be
flashing fast again(8 times every sec.), and
then you repeat steps as in above paragraph
a.).
(fig.1)
NFC™ Pairing with your phone
If your smart phone is NFC enabled,
a) Firstly, locate the NFC antenna spot on your smart
phone (fig.2)
b) NFC antenna is now on the front of our
“NU-006” speakers (fig.3)
c) Align NFC antennas as close as possible, you
will hear a 'cling' sound when they matched.
d) Wait for a few second and you will hear a
“Bloop” sound from the speaker and its blue
LED will lit continuously. The pairing is
completed now.
Note-
1. "The N-Mark is a trademark or registered trademark
of NFC Forum, Inc. in the United States and in other
countries."
2. Some phone models are NFC enabled, but their NFC
Apps were not built-in. For these models you will need to
install a NFC Apps and activate the NFC function on your
phone.
(
fig.2
)
(fig.3)
Model: NU-006
Page 1
Page 3
Page 4
Page 2
“NUSOUND(NU-006)-WiDE” Bluetooth
wireless stereo speakers (for smart phones;
with NFC pairing function)
Product Features
WiDE open stereo design
Bluetooth® v3.0 wireless connection up to
10M
NFC™ pairing function
Superb sound portable stereo speakers
Built-in 2 x 3W amplified speakers
Super bass enhancer module built-in
Built-in battery rechargeable via. USB
Speaker phone call-pick function
Portable simplicity design
AUX 3.5mm audio input
Ideal audio mategift for smart phones or
other multimedia player devices
This superb sound
stereo speakers is
compliant with
Bluetooth v3.0
wireless standard,
and powered by its
built-in battery which is rechargeable by USB
port from. The simplicity prism-look casing is a
stylistic desktop design which can be portable as
well. An ideal wireless audio companion for smart
phones.
Charging the speaker
Press to open the casing as shown (fig.1).
Connect the micro USB port with the charging
cable and its USB plug with marking to an
USB port with power on the other end. Red LED
will light up to indicate charging. When the
speaker is fully charged (approx. in 2.5 hours
every recharging), LED will turn into blue.