1)
To ensure that the meter is working properly, insert the check
strip into the meter the same was as you would insert a test
strip with the side that says “check” facing up.
2)
“OK” should display on the screen within 10 seconds. When you
eject the check strip the meter will automatically turn off.
3)
To delete all saved readings, repeat steps one and two. When
“OK” displays, hold the button for three seconds and “del” will
appear. When this happens, press and hold the button for two
more seconds and “OK” will appear and the meter will shut off.
Performing a blood glucose test:
1)
Insert a strip into the meter and confirm that the number on the screen
matches the code on the vial/pouch of foil wrapped strips.
2)
The meter will need .5ul of blood to perform the test and will produce
a reading within 5 seconds. After retrieving the reading, eject the test
strip by pressing the release button
3)
The meter will automatically shut off when the used test strip is
ejected.