Nuqleo SPARQ, Руководство пользователя, Страница: 10 / 22

- 5 -
into the slot.
5.2 Battery Installation
Caution : Install according to the illustration above to avoid breaking the battery connectors.
5.3 Charging the Battery
Insert the charger; the flash symbol on the charger plug must face upwards.
Connect the charger to a standard wall outlet and the battery power icon in the up-right corner of
the screen will start scrolling. When the battery bar stops scrolling, the battery charge is complete.
Press the two sides of the charger plug and disconnect the charger from the phone.
·
When the battery is low, a “low battery” message will display across the screen and the battery
icon will seem empty. If the battery level is insufficient, the phone will turn off automatically. Do
not use your phone under low battery state for an extended period of time or it may cause battery
damage.
5.4 Security Settings
—
PIN code
PIN code (Personal Identity Number) prevents unauthorized use of your phone. The PIN code is
provided by your network operator with the SIM card.
If you enter the wrong code three times in a row, the PIN code will be blocked. To unblock the
PIN code, you need to enter your PUK. Your PUK is provided by your network operator.
－
Phone Lock
Turn on/off Startup password (the length of the password is 4-8 digital numbers).
If you activate the “Phone Lock”, you need to enter the password each time you turn the phone on.
If you want to modify the phone lock password or deactivate “Phone Lock”, enter Change
password to set.
6. Your Phone
6.1 Power On
·
Press end key and hold to turn on your phone, light the backlight, and display power on
animation.
·
If you do not insert a SIM card, or the SIM card has incomplete connection, your phone will
show no signals for SIM cards. In this condition, you can only access part of the menu and only
permission using some urgent calling.
·
If the PIN code is blocked, the alert message for inputting PUK code will display on the screen
before power on.
·
The phone will search the network automatically after power on.
If your phone registers to network correctly, the name of the network and signal strength will
display; if your phone can’t register or can’t register correctly, you can only access emergency
calls and other functions that do not rely on the network.
6.2 Making a Call