NuPrime Omnia S1, Руководство пользователя

Страница: 11 / 26

10
www.nuprimeaudio.com
Setting up the Omnia
The Omnia S1 can be connected to your network either by using a wired connection (Ethernet) or using
the supplied USB dongle for a wireless connection.
Wired Connection (Ethernet)
Connect the Omnia S1 to your network router using a LAN cable. By default, the Omnia will obtain an IP
Address from your router via DHCP automatically. Power on the Omnia S1 via the rear switch and both
the Omnia Server and Renderer should be visible under your network devices after a few minutes.
Wireless Connection
Note: A HDMI display and USB mouse is required for performing this setup.
Insert the supplied USB dongle into one of the available USB port on the rear panel of the Omnia S1.
Connect the USB mouse to another one of the available USB port. Connect the display to the Omnia S1
via the HDMI video port. Power on the Omnia S1 and wait till the first time initialization completes (the
unit may restart automatically during the initialization). The setting icon is located at the bottom row on
the home screen. Click on the setting icon which will bring you to the settings page. Click on WIFI which
will bring to the WIFI settings page. The on/off toggle for the WIFI is located at the top right of the screen.