Nupower EVOLUTION NPE55, Руководство пользователя

Страница: 17 / 108

Dust extraction adaptor (pic.8) (NPE65)
This Jigsaw is equipped with a bayonet fitting dust extraction adaptor
(fig 8). Which can be fitted to a vacuum cleaner or suitable dust
extraction unit. To fit the dust extraction adaptor, fit the rubber “O” ring
onto the smaller diameter on the dust extraction adaptor and locate it
into the dust outlet at the rear of the machine. Push in firmly and twist
to engage the bayonet lugs.
Metal cutting
When cutting metals a suitable cooling/cutting oil must be used. Simply
squirt the lubricant onto the blade or work piece at regular intervals
during cutting to reduce blade wear.
Note: Do not immerse in water or allow coolant to enter the casing. A
fatal electric shock could occur.
Circle cutting
When starting a cut from the centre of the work piece, drill a 12mm
diameter hole to ensure that there is enough clearance for the blade.
Tip
When cutting materials with a decorative or polished finish cover either
the base of the Jigsaw or the surface of the material being cut with
masking or other suitable tape to prevent scratching.
NPE55 NPE65
Voltage 230V ~ 50 Hz 230V ~ 50 Hz
Motor Capacity 450 W 500 W
No load speed 500-3000 min
-1
500-3000 min
-1
Cutting Angles 0° +/- 45° 0° +/- 45°
Sound Pressure Level LpA 84.6 dB(A) LpA 84.6 dB(A)
Sound Power Level LWA 97.6 dB(A) LWA 97.6 dB(A)
Vibration Level 4.22 m/s 2 4.22 m/s 2
Weight 1,8 kg 2,3 kg
Max cutting capacity
Wood 55 mm 65 mm
Plastic 10 mm 15 mm
Steel 6 mm 6 mm
17
GB