8
ENGLISH
TROUBLESHOOTING
Warning:
Failure to properly maintain your laminator will void the warranty.
If there is a
problem with your unit, check below for the symptoms and steps to resolve. If you continue to have
problems, contact customer support at our Service Center.
DO NOT ATTEMPT TO REPAIR BY OPEN-
ING THE LAMINATOR. This will completely void the product warranty.
No Power. Indicators do not turn on and laminator does not work.
Check the power plug and see if it is correctly plugged into the wall socket. If it is still not working,
please call the Customer Service center.
Laminator is jammed:
Only use pouches intended for laminators. Make sure item in pouch is evenly inserted. For smaller
items, do not use too large a pouch since this may cause poor laminating quality and create jams.
Clear jams by using the release lever:
• Turn off laminator and unplug from power outlet.
• Make sure laminator is on a stable flat surface.
• Firmly push the Jam Release lever all the way to the right
and hold.
• With the other hand, pull to removing the jammed item
from either the front or back opening.
• When cleared, plug the power cord back into the outlet. Turn on and resume use.
• If laminator repeatedly jams, please contact the Customer Service center.
Avoid jams by:
• Only use pouches intended for laminators.
• Be sure to insert with the closed (sealed) edge of the laminating pouch first.
• Make sure item in laminating pouch is evenly inserted.
•
For smaller or irregular shaped items,
do not use too large a pouch since this may cause
poor laminating quality and create jams. Position in center of adequate sized pouch and trim after
lamination.
DO NOT CUT LAMINATING POUCH TO FIT ITEM BEFORE LAMINATION.
• Do not laminate wet items. Laminating damp/moist documents will result in poor laminate quality.
Lamination is cloudy and or bubbled:
Run the laminated item though the laminator again. The laminator requires a 3-5 minute preheating
time.
Содержание LM1380HC
Страница 2: ......
