3
OPERATION
CONTINUED NEXT PAGE
AUTO / ON:
This setting allows the shredder to be automatically started by inserting paper into the
shred opening. Always feed the paper in as straight as possible. When the paper has
passed through, the shredder will automatically stop. (FIGURE 2)
OFF:
This setting turns off all features of the shredder. For safety reasons, we recommend that
you leave the shredder in the "Off" position whenever the shredder is unattended or not
in use. (FIGURE 2)
REV (REVERSE):
In the unlikely event of a paper jam, the reverse setting can be used to help clear the cutters
of paper that has not passed through. Never attempt to clear a jam by using the reverse
function until you have emptied the wastebasket. (FIGURE 2)
I
O
R
Using the switch located on the unit, select one of the following settings by sliding the switch either
left or right. (FIGURE 2)
ShredSafe™
technology is an added safety feature incorporated in this
particular model. It is a new technology where the shredder is able to detect
forced entry and automatically cuts the power off, preventing further shredding.
To begin shredding, locate the switch on the unit and select the “Auto” mode (FIGURE 2). The Green
LED light indicates the shredder is “On” and ready to use. Press the designated “PUSH OPEN” area
on the handle of the cover to tilt open and expose the paper feed slot (FIGURE 3).
The cover will
click into a preset position where the “SHREDDER STATUS” indication line must align
with the “READY” setting.
Paper feeds from both left and right sides. With the feed slot now
open, you can shred sheets of paper (FIGURE 4).
FIGURE 3
FIGURE 4
FIGURE 2
FIGURE 5