Nuna zaaz HC-07, Инструкции по ремонту

Страница: 6 / 18

6
EN
Assemble Seat Cushion
onto Seat
1 Place the new seat cushion on the Zaaz
seat.
2 Insert the seat cushion clip into the inner
of two holes in the sitting surface and
listen for a click.
(5)
Assemble Harness
Restraint onto Seat
1 Insert waist clips into the lower backrest
holes (around the seat cushion, when
cushion is in use) and listen for a click.
(6)
2 Insert shoulder harness clips into the
upper backrest holes and listen for
a click.
(6)
3 Insert the remaining center buckle clip
(through the seat cushion, when cushion
is in use) into the inner of two holes in the
sitting surface of the seat and listen for a
click.
(6)
4 Check that the harness attachment is secure by pulling on each
attachment point.
WARNING
When used as a high chair, the child must always wear the
harness restraint correctly fitted and adjusted.
6
5