Num'axes Canicom 5.1000 LE, Руководство пользователя, Страница: 26 / 78

Gb - 26
Programming the button for the collar Nr 1 (collar with black strap):
- Activate the remote control
- Select the collar Nr 1
- Press the
-
button for approximately 5 seconds until the stimulation level flashes on the LCD screen
- Press the
+
or
-
button to modify the stimulation level
- Press the button to confirm the level selected
If you have several collars, renew the same procedure for each one.
●
+
a nd
-
buttons: stimulation level control buttons
Use the
+
a nd
-
buttons for rapid adjustment of the level of stimulation of the receiver collar.
25 levels of stimulation are available.
Level 1: very weak stimulation – Level 25: strong stimulation
Always start with the lowest level of stimulation.
● Back-lightning of the LCD screen
You can light the LCD screen for approximately 6 seconds by pressing briefly the On/Off button of the remote
control (approx. ½ second).
● Checking/replacing battery of the remote control
To check the condition of the battery, activate the remote control and look at the battery
level indicator on the LCD screen.
Performance (radio range) of the remote control may deteriorate as battery becomes weak.
Be prepared to replace battery.
WARNING: Make sure the polarity is correct.
Diagram 7 - Replacing the battery in the remote control