CAUTION! Dangerous operating conditions may occur when using the programming interface on the valve as the valve may possibly
not react to the analog setpoint any more.
Provide for protection against uncontrolled movement of equipment when putting the valve into operation and before making any
modifications to the valve settings.
NOTICE
The information in this manual is subject to change without notice.
In no event shall Numatics be liable for technical or editorial errors or omissions. Neither is any liability assumed for accidental or consequential
damages arising out of or in connection with the supply or use of the information contained herein.
THIS MANUAL CONTAINS INFORMATION PROTECTED BY COPYRIGHT. NO PART OF THIS DOCUMENT MAY BE PHOTOCOPIED OR REPRODUCED
IN ANY FORM OR MANNER WHATSOEVER WITHOUT PRIOR WRITTEN PERMISSION FROM NUMATICS.
E S D
This product complies with the essential requirements of the EMC Directive 89/336/EEC and its amendments. It is
CE-approved. A separate Declaration
of Conformity is available on request.
A separate Declaration of Incorporation relating to the EU Directive 89/392/EEC Annex II B is available on request. Please provide ordering code and
serial numbers of products concerned.
DECLARATION OF INCORPORATION
according to Machinery Directive 89/392/EEC, Annex II B
We herewith declare that the version of the product described in this installation manual is intended to be incorporated into or assembled with other machinery and
that it must not be put into service until the machinery into which it is to be incorporated has been declared in conformity with the provisions of Council Directive
89/392/EEC, Annex IIB.
Handling, assembly and putting into service and all settings and adjustments must be done by qualified, authorised personnel only.
This product contains electronic components sensitive to electrostatic discharge.
An electrostatic discharge generated by a person or object coming in contact
with the electrical components can damage or destroy the product.
To avoid the risk of electrostatic discharge, please observe the handling
precautions and recommendations contained in standard EN 100015-1. Do not
connect or disconnect the device while it is energised.
C A U T I O N
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC SENSITIVE DEVICES
!
1
1.1
1.2
1.3
1.4
2
3
4
5
6
7
7.1
7.2
8
9
10
Table of Contents
Sentronic
D
Description
3
How To Order
3
Operating Elements
4
Manual Pressure Regulation
4
Operating Modes
4
Electrical Connection
5
Analog Setpoint - Outlet Pressure
6
Pneumatic Connection
7
Factory Settings for a Standard Valve
7
Field-programmable settings
8
Technical characteristics
8
Fluid characteristics
8
Specifications
8
Accessories
9
Maintenance and care
9
Dimensions and weights
10