Regular Maintenance...
If you require further training or
assistance contact your supervisor
Unplug the battery from the machine using the red connection handle (Fig.A & B).
The battery can then be lifted from the machine for storage or charging (Fig.C).
C
B
A
Removing the Battery ...
The battery pack comes fitted with a 40 amp safety fuse.
Replace the fuse using (208526) Numatic approved part
Recharge the machine fully after its last use. Do not leave the machine in a discharged state.
Under abnormal use; i.e. leaving the machine without charging for a period of time, we advise that you disconnect the battery from the machine.
If the machine will be standing unused for a period of 30 days or more, then batteries must be fully charged.
Note:
Batteries should be recharged every three months. Charge fully the day before you start using the machine again.
Under normal daily usage:
Recharge batteries after each use regardless of machine operation time. Connect the charger unit to the battery and plug the charger into a suitable power
supply.
Battery Charging ...
Removing the Battery Pack Fuse ...
Fitting Brush - Floor Tool, Filling Machine, Fill Gauge, Moving
Water Flow Adjustment, Raising the Floor Tool
Draining Top Tank, Draining Bottom Tank, Clean Water Filter
