VirtualDJ 8
– Numark NV
21
Slicer Hold mode
While the Slicer mode is selected, press the same SLICER mode button
again
to set the
PADs to
Slicer Hold mode
(led will blink).
In this mode the pads offer the
same functionality as in the Slicer
mode, but in this case, the
Slice is
memorized
on first press as the
track continues to play. (HOLD
mode).
The playing Slice is represented by
the currently orange lit pad.
Same as in Slicer mode, Use the
PARAMETER
<
and
>
buttons (
38
)
to adjust the
length of the Loop
applied to the slice.
Press
SHIFT
and then use the same PARAMETERS < and > buttons to adjust
the step of
the Slices.
Inputs & Recording
The pre-defined Audio configuration of VirtualDJ 8 for the Numark NV provides the ability to
record your mix without any further adjustments.
However, since both Microphone and Line Inputs of the Numark NV are
directly routed to
the Master Output
of the unit (Hardware Inputs), those cannot be controlled from VirtualDJ
or included in the Audio Setup.
If you wish to
record
both the
software mix and the Inputs
(Microphone and Line Ins) at
the same time, you will need to:
-
Route the
Booth Output
of the NV
to a Line Input
of a different sound card (could
be the MIC/LINE Input of your computer’s built-in sound card) using suitable RCA
cables
-
Add a Record Line
to the Audio Setup using the Input of the
2
nd
sound card
.
.
Содержание NV
Страница 1: ...VirtualDJ 8 Numark NV 1 ...
