Numark DM 1885X Скачать руководство пользователя страница 3

DM1885X

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

   CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK DO NOT REMOVE ANY COVER.  NO USER-

SERVICEABLE PARTS INSIDE. REFER SERVICING  TO

QUALIFIED SERVICE PERSONNEL ONLY.

The lightning flash with arrowhead symbol within the 

equilateral triangle is intended to alert the user to the presence 

of un-insulated “dangerous voltage” within the product’s 

enclosure that may be of sufficient magnitude to constitute 

a risk of electric shock to persons.

The exclamation point within the equilateral triangle is intended 

to alert the user to the presence of important operating and

maintenance (servicing) instructions in the literature 

accompanying this appliance.

CAUTION

FOR USA & CANADIAN  MODELS ONLY

TO PREVENT ELECTRIC SHOCK DO NOT USE THIS

(POLARIZED) PLUG WITH AN EXTENSION CORD, RECEPTACLE

OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY

INSERTED TO PREVENT BLADE EXPOSURE.

SAFETY INSTRUCTIONS

1. Read Instructions - All the safety and operating
instructions should be read before this product is
connected and used.

2. Retain Instructions - The safety and operating
instructions should be kept for future reference.

3. Heed Warnings - All warnings on this product and in
these operating instructions should be followed.

4. Follow Instructions - All operating and other
instructions should be followed.

5. Water and Moisture - This product should be kept
away from direct contact with liquids.

6. Heat - Avoid placing this product too close to
any high heat sources such as radiators.

7. Power Sources - This product should be
connected to a power supply only of the type
described in these operating instructions, or as
marked on the unit.

8. Power Cord Protection - Power supply cords
should be routed so that they are not likely to
be walked upon or pinched by items placed on
or against them.  When removing the cord from a
power outlet be sure to remove it by holding the
plug attachment and not by pulling on the cord.

9. Object and Liquid Entry - Take care that
objects do not fall into and that liquids are not
spilled into the inside of the mixer.

10. Damage Requiring Service - This product
should be serviced only by qualified personnel.
If you have any questions about service
please contact Numark at the number(s) shown
on the back cover of this manual.

11. Grounding or Polarization - Precautions
should be taken so that the grounding or
polarization means built into the mixer is not
defeated.

12. Internal/External Voltage Selectors - Internal
or external voltage selector switches, if any,
should only be reset and re-equipped with a
proper plug for alternative voltage by a qualified
service technician. Do not attempt to alter this
yourself.

NOTE: This apparatus does not exceed the 
Class A/Class B (whichever is applicable)
limits for radio noise emissions from digital
apparatus as set out in the radio interference
regulations of the Canadian Department of
Communications.

WARNING: To reduce the risk of fire or electric
shock, do not expose this appliance to rain or
moisture. Electrical equipment should NEVER be
kept or stored in damp environments.

Please record the serial number of your unit as shown on the back of the chassis as well as the name of the
dealer from whom you purchased the unit.  Retain this information for your records.  Please return the
warranty card enclosed to register your mixer with us.

MODEL:  DM1885X

PURCHASED FROM:_________________________

SERIAL NUMBER:__________________

DATE OF PURCHASE:________________________

Numark - The Proven Leader in DJ Technology

©1997 Numark Industries

3

      

http://www.numark.com

Содержание DM 1885X

















Отзывы: