Numark DJio, Быстрый старт, Страница: 13 / 21

11
If you are using the DJ IO with Numark’s Cue or Cue Lite DJ software applications, please see the example and
instructions below for information on routing your audio outputs to take full advantage of cueing and monitoring.
In Cue, click on the
Config button in the top right
corner of the screen to access Cue Lite’s
configuration settings. You will see the window
shown on the right.
1.
Select NONE from the Inputs pull-down
menu.
2.
Select ASIO driver from the Sound card(s)
pull-down menu.
3.
Select Numark USB Audio Device under the
ASIO driver pull-down menu.
4. Select Headphones from the Outputs pull-
down menu.
5.
Lastly, you can choose which outputs you
would like to use for your Master and
Headphones channels from the pull-down
menu on the bottom. Since the Headphone
output on the DJ IO is tied to the Output 2
stereo RCA pair, we recommend leaving this
option as it is (
Master: Chan 1&2 /
Headphones: Chan 3&4 ).
6.
Click OK to exit the configuration settings.
Additional Information: You may also wish to send each virtual “deck” independently to each output pair on
the DJ IO for use with an external mixer. To do so, please select
External Mixer from the Outputs pull-
down menu. You will then be able to decide which deck is being sent to which output pair.
ROUTING AUDIO OUTPUTS IN CUE