CDN-22
CONNECTIONS
Typical connection with a mixer is illustrated right.
Please use it for reference.
•Connect the output connection cords from the CD Player to the line
inputs of your mixer.
•Connect the remote control connection cable from the Unit 1
connector on the main unit to the Unit 1 connector on the remote
control unit. Repeat for Unit 2.
•The output connection cords and the remote control connection
cables are supplied with the main unit. Be sure to use the remote
control connection cables which have been supplied. Use of another
cable type might cause damage.
DIGITAL OUTPUT
IEC CONNECTOR
VOLTAGE SELECTOR
POWER ATTACHMENT: Your CD player is equipped an IEC style power connector. Please first
select the proper voltage for your location. Next, plug in you supplied power cable into the rear of
the unit then plug into the appropriate power outlet
DIGITAL OUTPUTS: This CD player is specially equipped with digital outputs. The format is
type 2, form 1, also known as S/PDIF (Sony/Phillips Digital Interface Format). In order to use
the digital output you must be sure not to vary the pitch in any way. To ensure this,
press the pitch button to deactivate the variable pitch slider and don’t use the pitch bend buttons
or pitch wheel. If you adjust the pitch, other devices will not read the digital output properly.
MOUNTING YOUR CD PLAYER
•Mount the units in your console or rack with 19” EIA rails
•The transport should be mounted not to exceed an angle of 15 degrees.
•Your CD player can be affected by excess vibration so mount the units in a secure environment if
possible.
Numark - The Proven Leader in DJ Technology
©1998 Numark Industries
7
http://www.numark.com
