CDN-24S
- The Leader in DJ Technology
©1999 Numark Industries
- 8 -
http://www.numark.com
DESCRIPTION CDN-24S REMOTE FEATURES
a)
PROGRAM - Depress this button and the unit will stop
and the program indicator will light. Select each track to
be programmed and press the PROGRAM button between
selections. You can program up to 30 tracks. Press
PLAY to start the program. To exit and erase program
hold the program button down for more than 2 seconds
while the unit is stopped, open the disc tray, or turn off the
power.
b)
CONT/SING - Will cause just a single track to play or all
tracks in order by pressing once or twice.
c)
LCD DISPLAY - Indicates all the functions, as they are
occurring, with the CD. These functions are explained in
the next section.
d)
TIME (Time Button) - The TIME button switches the time
display between elapsed playing time and remaining time
on the track. Holding for more than one second activates
auto-start functions.
e)
OPEN/CLOSE (Disc Tray Open/Close) - Press to load or
eject the disc. Each press will open or close the disc tray
on the transport. NOTE: Tray will not open unless the
disc has been paused.
f)
TRACK (Track Buttons) - These buttons are used to
select the track to be played.
g)
Track 10 Button - This button is for quickly advancing to
higher tracks on a CD.
h)
PITCH (Pitch Button) - This button activates the Pitch
Slider (14).
i)
PITCH BEND (Pitch Bend Button) - When each of the
two CD players is playing a CD, the pitch bend function
allows the positioning of the bass beats to be matched
after the pitch of each disc is matched. Either player can
“catch up” or “fall back” to match the other player. The
pitch will automatically rise while the + button is pressed
(allowing “catch up”) and return to the original pitch when
the button is released. The pitch will automatically drop
while the button is pressed (allowing “fall back”) and return
to the original pitch when the button is released. By
changing the pitch of one disc with respect to the other in
this way the beats can be matched.
j)
SEARCH WHEEL (OUTER RING) - This wheel has 3 forward
and 3 reverse speed positions for searching through songs.
The more you turn the wheel in either direction the faster you
search through the music.
k)
JOG WHEEL (INNER RING) - This jog wheel serves 2
functions depending on the current mode.
a)
The jog wheel will act as a slow frame search control
when the CD is not playing but either paused or set to a
cue point. To set a new frame cue point, spin the wheel
then press play when you have determined the proper
position. Press CUE to return to the “CUE POINT”.
b)
The jog wheel will temporarily bend the pitch of the music
if the song is already playing by rotating the wheel
clockwise to speed up or counterclockwise to slow down.
l)
CUE - Pressing the CUE button during play provides a return
to the position at which play was started. If PAUSE is used
before CUE, that will become the cue point. Alternately
pressing the PLAY button and the CUE button allows the CD
to be played from the same position any number of times. The
CUE LED will light up from the time the CUE button is
pressed until the CD has reset to the position at which play
was started. Steady lighting of this LED indicates the ready
condition.
m)
START/PAUSE (Play/Pause Button) - Each press of the
Play/Pause Button causes the operation to change from play
to pause or from pause to play.
n)
PITCH SLIDER - The pitch can be changed up to +/-12% by
pressing the PITCH button so the PITCH LED is lit, then
moving the sliding fader. The pitch will not be changed if the
PITCH LED is off.
o)
COUNTER BUTTON - Tap this button with the beat of the
music to determine the current Beats Per Minute (BPM).
p)
BPM BUTTON - Switches the mode of the display between
showing the BPM and the percentage change in pitch.
q)
LOOP BUTTON - Used for repeating sections in the music.
This is not a seamless function.
r)
RELOOP BUTTON - For repeating the loop.
