CDN-22
MK iii
- The Leader in DJ Technology
©
2002
Numark Industries
- 14 -
http://www.numark.com
BEFORE SWITCHING OFF THE POWER:
When you have finished using the CD player, be sure that the disc tray is closed with the
“OPEN/CLOSE” button before switching off the power .
DO NOT switch off the power when
the disc holder is open.
Switch off the power after the
disc holder has been closed
with the “OPEN/CLOSE” button
TROUBLESHOOTING:
Symptom
Possible Cause
Corrective Action
The power fails to switch on
when the POWER switch is set
to on
Poor power plug connection at
the AC outlet
Insert the power plug firmly into
the AC outlet and make sure
connection is good in unit rear
Disc play does not start
The disc is loaded upside down
The disc is too dirty
Reload the disc with the label
side up
Clean the disc
No sound
Improper output cable
connections
Improper amplifier operation
Connect the output cables
correctly
Check amplifier setup
Sound skips
The CD player is subject to
vibrations or physical shock
The disc is too dirty
Change the installation location
Clean the disc
Programmed disc play will not
function
The CD player is in normal disk
play mode
Hold down the Program button
for 3 seconds then program the
tracks
Hum
Loose cable connections
Firmly connect all audio plugs
