PARTS LIST
Before you connect or use your Beatkeeper™, please check to make
sure your Beatkeeper™ was shipped with all of the following items:
(1) Beatkeeper™ II
(1) AC Adapter (110V or 220V )
(4) Sets of Patch Cords
(1) Set of Rack Mounting Hardware (4 screws and 4 washers,
may be contained with adapter)
(1) Owner’s Manual (
If you are reading this, it's probably in your
hands.
)
FCC NOTES
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
We can not guarantee interference free operation in a particular
installation. If the unit does cause interference to any radio or television
reception, attempt to reduce the interference by one or more of the
following means.
a) Turn or move the other unit and/or its antennae.
b) Move this unit further from the effected unit.
c) Plug the two units into different AC outlets, so that they are on different
circuits.
This device also complies with EN55022 Class B radiated and
conducted emissions limits. Note from the manufacturer: At the time this
product was tested, it was classified as a professional audio product and
thus was only required to meet class A emissions requirements. This
product has been designed to comply with the more stringent class B
emissions requirements for equipment intended for sale to the home audio
market, as well as allowing the use of this product in radio installations.
7