Numark AVM02 Скачать руководство пользователя страница 7

Страница: 7 / 36

Function Buttons

The Function Buttons apply different effects and settings depending on which Mode button you have

selected. To learn quickly, start with one Mode at a time and learn all the different Function selections
that can be used with it. Then, go to the next mode.

Settings are saved while changing from one Mode/Fade Type to another. When the power is shut off, the

unit reverts back to the default factory settings.

Wipe Functions:

There are six different Wipe

styles. Each one has four sub-functions to

cycle through by pressing the button multiple
times. While using the center Wipe Function

(lower left corner of the seven Function
controls) the Joystick can be used to position

the object on the screen. The Multi Screen
feature (see below) can also be used with the

Wipe Function.

PIP Functions:

There are six different PIP

styles. The top three have a border with the

color selected by the Background Select
button. The bottom three are borderless. The
PIP screen can be positioned by the Joystick.

The Multi Screen feature (see below) can be
used with the PIP Function.

Multi-Screen Functions

: The Multi-Screen

Function can only be used in Wipe or PIP
mode. Multi-Screen will divide the effect

screen into 1, 4, or 16 equal and separate
parts depending on how many times the

button is pressed.

Key Functions:

While in Key mode, there are

four active Function buttons. The Luma Key

and Blue Key buttons set the mode. The
Source A and Source B buttons select the

desired source for the effect.

•

Key A Button:

Sets the Primary

Source to Bus A.

•

Key B Button:

Sets the Primary

Source to Bus B.

•

Blue Key Button:

This replaces

blue (Pantone 293) areas of the
screen with a secondary image,

at a level controlled by the Video
Crossfader. It is typically used in
news broadcasts for super-

imposing a weather map behind
the weatherman. Press the Blue

Key button repeatedly to toggle
between the available blue key

modes.

•

Luma Key Button:

This mode is

similar to the Blue Key except
that it will first replace black and

then progress to replace lighter
shades based on the position of

the Video Crossfader. Press the
Luma Key button repeatedly to

toggle between the two available
luma key modes.

Joystick Control & Color Button

The Joystick is used to control the screen position of the PIP and center Wipes. You can
create some interesting effects by selecting the same source for both busses, selecting

center Wipe and mixing halfway, and selecting and effect on one Bus. The Joystick will
allow you to move the effect around on the screen.

The color button is used to select the desired color for use with background effects.

Changing Video Settings (NTSC, PAL, SECAM)

In order to change video settings to conform to different formats, these button combinations may be
used:

NTSC

Color + F/X B

PAL

Color + Still (B-bus)

PAL N

Color + Strobe (B-bus)

Secam

Color + Mosaic (B-bus)