Numa Patriot 180 Скачать руководство пользователя страница 5

09/19/16

Page 1

Patriot

®

 180

SECTION I

DESCRIPTION

GENERAL DESCRIPTION

    The Patriot 180 is a valveless, pneumatically operated tool designed to utilize Numa 18" 

to 30" (457 mm to 762 mm) diameter bits in rock formations under a wide range of operating 

conditions.

    The Patriot 180 hammer design incorporates a non-reversible, hardened case.  The single 

bore design allows for a maximum bore diameter in conjunction with optimum life against 

abrasion.  The simple design of the Patriot 180 provides performance and dependability 

without sacrificing tool life.

    The Patriot 180 is designed for universal applications using air pressure from 100 PSI 

to 250 PSI (6.8 Bar to 17.2 Bar) with compressors having capacities of 1350 CFM (637 Litres/

Second) or more.  When drilling conditions require supplementary hole cleaning, additional 

hole cleaning air can be passed through the hammer by utilizing an interchangeable choke.  

All standard hammers shipped from Numa have a blank choke installed.   Refer  to page 15 

for correct choke selection and pages 7 and 12 to facilitate the removal and the installation 

of the choke. The Patriot 180 hammer is a high performance tool which may require additional 

downfeed to maximize performance. Please contact your local Numa Representative for 

further details.

Patriot 180

 

Weight w/o Bit 

2,523 lbs. 

(1144 kg)

 

Outside Diameter 

15-1/2" 

(394 mm)

 

Hammer Length:

 

  Shoulder to Shoulder 

65-15/16" 

(167 cm)

 

  Shoulder to Bit Face 

75-15/16" 

(193  cm)

 

Backhead API Thread  

8-5/8 API REG

Table 1-1 General Hammer Specifications

    18"  (457 mm) 

1029 lbs.  (468 kg) 

 26"  (661 mm) 

1751 lbs.  (796 kg)

    20"  (508 mm) 

1254 lbs.  (570 kg) 

 28"  (711 mm) 

2007 lbs.  (912 kg)

    22"  (559 mm) 

1347 lbs.  (612 kg) 

 30"  (762 mm) 

2275 lbs.  (1034 kg)

    24"  (610 mm) 

1616 lbs.  (735 kg)

  

Table 1-2 General Bit Specifications

NOTE

NUMA 18" TO 30" (457 MM TO 762 MM) BITS ARE AVAILABLE IN CONCAVE FACE 

DESIGN WITH LARGE AIR FLUSHING HOLES AND CHIP WAYS TO TAKE ADVANTAGE 

OF THE PATRIOT 180 PERFORMANCE.  OTHER SIZES MAY BE AVAILABLE UPON 

REQUEST.

Содержание Patriot 180




























Отзывы: