CODING
-
345044
MANDO
ASSEMBLY GUIDE
/ 4
2
STEP 6
STEP 4
STEP 2
STEP 5
STEP 3
STEP 1
1
3
4
5
6
11
12
3
4
5
5
3
4
5
6
1
3
4
5
6
- Insert hardware A1 onto panel (3), (4) and (5).
(Repeat 6 times.)
- Insert hardware A2 onto panel (1).
(Repeat 6 times.)
- Insert hardware B onto panel (3), (4) and (5).
(Repeat 12 times.)
SCREWDRIVER
REQUIRED
* Ensure the arrows on hardware A1 point towards mounting positions.
A2
x6
ROTATE
PRESS
A1
x6
x12
PRESS
B
- Insert hardware A1 onto panel (12).
(Repeat 4 times.)
- Insert hardware A2 onto panel (10) and (11).
(Repeat 4 times.)
- Insert hardware B onto panel (6), (10) and (11).
(Repeat 20 times.)
SCREWDRIVER
REQUIRED
* Ensure the arrows on hardware A1 point towards mounting positions.
10
x20
PRESS
B
6
6
6
A2
x4
ROTATE
12
PRESS
A1
x4
Fix hardware K1 (L/R) into panel (3), (4) and (5) with hardware E.
(Repeat 3 times for each hardware.)
SCREWDRIVER
REQUIRED
x3
ROTATE
x3
x3
ROTATE
ROTATE
K1(L)
E
E
E
Third hole from the edge.
First hole from the edge. Small hole at the center.
K1(R)
K1(L)
Fix hardware K1 (R) into panel (5) with hardware E.
(Repeat 2 times for each hardware.)
SCREWDRIVER
REQUIRED
K1(R)
Third hole from the edge.
First hole from the edge.
x1
x1
ROTATE
ROTATE
E
E
Attach panel (6) to panel (3), (4) and (5) .
(Repeat 4 times.)
* In this step hardware B are pre-inserted.
6
6
6
- Attach panel (1) to panel (3), (4) and (5).
- Insert all hardware A2 into A1.
- Rotate all A1 until tight.
- Apply A3 onto all A1.
(Repeat 6 times.)
OR
HARDWARE
D
SCREWDRIVER
REQUIRED
* In this step hardware A1, A2 and B are pre-inserted.
ROTATE
Section View
x6
A1
A2
x6
PRESS
A3
6
6
6
