CODING
-
343038
CAPRI
ASSEMBLY GUIDE
/ 5
2
STEP 6
STEP 4
STEP 2
STEP 5
STEP 3
STEP 1
1
7
3
4
5
3
5
3
5
7
2
3
4
5
7
1
2
3
4
5
7
- Insert hardware A1 onto panel (7).
(Repeat 4 times.)
- Insert hardware A2 onto panel (1).
(Repeat 6 times.)
SCREWDRIVER
REQUIRED
* Ensure the arrows on hardware A1 point towards mounting positions.
A2
x6
ROTATE
PRESS
A1
x4
- Insert hardware A1 onto panel (3), (4) and (5).
(Repeat 6 times.)
- Insert hardware A2 onto panel (3) and (5).
(Repeat 4 times.)
- Insert hardware B onto panel (3), (4) and (5).
(Repeat 12 times.)
* Ensure the arrows on hardware A1 point towards mounting positions.
PRESS
A1
x6
x12
PRESS
B
Fix hardware N1 (L/R) into panel (3) and (5) with hardware E.
(Repeat 3 times for each hardware.)
SCREWDRIVER
REQUIRED
x6
ROTATE
x6
x6
ROTATE
ROTATE
N1(L)
E
E
E
Third hole from the edge.
First hole from the edge. Small hole at the center.
N1(R)
- Attach panel (3) and (5) to panel (7).
- Insert all hardware A2 into A1.
- Rotate all A1 until tight.
- Apply A3 onto all A1.
(Repeat 4 times.)
OR
HARDWARE
D
SCREWDRIVER
REQUIRED
* In this step hardware A1, A2 and B are pre-inserted.
- Attach panel (1) to panel (3), (4) and (5).
- Insert all hardware A2 into A1.
- Rotate all A1 until tight.
- Apply A3 onto all A1.
(Repeat 6 times.)
OR
HARDWARE
D
SCREWDRIVER
REQUIRED
* In this step hardware A1, A2 and B are pre-inserted.
Section View
ROTATE
A1
x4
A2
x4
PRESS
A3
Connect panel (2) to panel (3), (4) and (5)
by using hardware C and D.
(Repeat 6 times.)
ROTATE
x6
C
D
* In this step hardware B are pre-inserted.
HARDWARE
D
ROTATE
Section View
x6
A2
A1
x6
PRESS
A3
5
A2
x4
ROTATE
