NTG5110 & NTG5220
400-115-006-E 10/11/06 2/3
This thermostat is pre-programmed with the following default sched-
ule:
It applies to people who wake up at 6:00 AM, leave for work by 9:00
AM, return home for 5:00 PM and go to sleep at 11:00 PM.
If the pre-programmed schedule fits your lifestyle, skip the following
section.
First, program your schedule. You can program 4 different periods for
each day of the week. For each day, enter:
Press
Pgm
to access the programming mode. Period 1 is
displayed (
).
Press
Day
to select the day to be programmed (hold for
3 seconds to select all days of the week).
NOTE:
It is faster to program the same schedule for the entire week,
then modify the exception days (i.e. Saturday and Sunday).
Press
Hour
and
Min
to program the start time, OR
Press
Clear
to clear a time entry.
Press
Pgm
to select the next period.
Repeat steps 3 and 4 for remaining periods.
When you have completed your programming, press
Mode/Ret
to exit the programming mode.
Programming Example:
This example applies to people who are home during the week.
•
Comfort period from 6:00 AM to 11:00 PM (Period 1)
•
Economy period from 11:00 PM to 6:00 AM (Period 4)
•
Identical schedule for all days of the week.
Press
Pgm
to access the programming mode.
Period 1 is displayed (
).
Press and hold
Day
for 3 seconds to select every day
of the week.
Press
Hour
to enter 6:00 AM for Period 1.
Press
Pgm
to select Period 2 (
) and press
Clear
to delete
the time entry (- - : - -).
Press
Pgm
to select Period 3 (
) and press
Clear
to delete
the time entry (- - : - -).
Press
Pgm
to select Period 4 ( ) and press
Hour
to enter
11:00 PM.
When you have completed your programming, press
Mode/Ret
to exit the programming mode.
To modify the Saturday and Sunday Schedules:
When making modifications, make sure you are in the right period.
For example, if you are modifying the time for the time you wake up,
make sure you are in Period 1.
Press
Pgm
to select Period 1 (
).
Press
Day
to select
SA
(Saturday).
Press
Hour
and
Min
to enter the time you wake up on week-
ends.
Press
Pgm
to select Period 4 ( ).
Press
Hour
and
Min
to enter the time you go to sleep on week-
ends.
Repeat above steps for Sunday (
SU
).
Press
Mode/Ret
to exit programming mode.
NOTE: To avoid damaging your floor, follow your floor supplier’s rec-
ommendations regarding the minimum and maximum floor tempera-
ture limits.
The minimum and maximum floor temperature limits are 5 °C (41 °F)
and 28 °C (82 °F) by default. To modify these limits, proceed as fol-
lows:
Switch the thermostat to Standby.
Press and hold the button.
Switch the thermostat back to On.
Release the button when the minimum temperature
limit (
FL:LO
) appears.
Set the minimum temperature limit using the
buttons.
Press the button to display the maximum
temperature limit (
FL:HI
).
Set the maximum temperature limit using the buttons.
Press
Mode/Ret
to exit.
Temporary or Permanent Temperature Bypass:
This operation allows you to temporarily modify the floor temperature
while you are in the Automatic mode.
•
Simply press to select the desired temperature, or
or
button to select the Comfort or Economy settings you have pro-
grammed.
This temperature will be maintained until the beginning of the
next programmed schedule.
•
You can also switch to the Vacation setting for a prolonged
absence by pressing . In that case, the temperature bypass is
permanent.
To return to the normal operating mode, press
Mode/Ret
.
If you wish to immediately return to the programmed settings, press
Mode/Ret
.
Default Schedule
5.
Periods
MON
TUE
WED
THU
FRI
SAT
SUN
88°F
6 AM
6 AM
6 AM
6 AM
6 AM
6 AM
6 AM
73°F
9 AM
9 AM
9 AM
9 AM
9 AM
--:--
--:--
88°F
5 PM
5 PM
5 PM
5 PM
5 PM
--:--
--:--
73°F 11 PM 11 PM 11 PM 11 PM 11 PM 11 PM 11 PM
Modify the Default Schedule
6.
Time you wake up (Period 1)
Time you leave for work (Period 2)
Time you return home (Period 3)
Time you go to bed (Period 4)
Floor Temperature Limits (AF mode only)
7.
Special Features
8.
