NuForce HAP-100, Руководство пользователя, Страница: 6 / 9

4
Quick Start Guide:
r Turn on the AC switch on the back of the unit
r Power On: Push the knob once and release.
r Input Select: When the HAP-100 is On, pushing the knob cycles between Input
1, 2, 3, 4
r Volume: Rotating the knob clockwise raises the volume.
r Power Off: Push and hold down the knob for 3 seconds.
Note: There is no memory. Once the power cable is removed and turned back on,
it reverts to the factory default volume and input 1
Using the Remote Control:
r
Power On turns on the HAP-100
r Power Off turns off the HAP-100
r Input cycles through the HAP-100’s 4 inputs
r Vol + raises the volume
r Vol - lowers the volume
r Power On then Input - turns off HAP-100 Analog Output.
The 6.3mm front panel Output jack remains enabled..
r Repeat the above sequence a second time. This will
cancel the previous command and restore the Output to
normal operation.
To Enable Dim Mode
Dim Mode:
In the Dim Mode, when the unit idles for three seconds or more, the
front LED turns off.
Note: When the LED is off, the unit is still operating. The LED will
turn back on when the remote or knob are being employed
To Enable Dim Mode:
r Press and hold Power On button while pressing the Input button,
repeat the step again to disable the Dim Mode.