4
Quick Start Guide:
r
Turn on the AC switch on the back of the unit
r
Power On: Push the knob once and release.
r
Input Select: When the DDA-100 is On, pushing the knob cycles between Input C1, U2, O3, O4
r
Volume: Rotating the knob clockwise raises the volume.
r
Power Off: Push and hold down the knob for 3 seconds.
Note: there is no memory. Once the power cable is removed and turned back on, it reverts to the
factory default volume and input C1
Connections:
r
The DDA-100 has 2 optical (Toslink), 1 Coaxial SPDIF and 1 USB digital inputs. Connect your
digital sources to one or more of the inputs. The DDA-100 accepts normal PCM signal (also
referred to as LPCM). It does not recognize encoded bit streams (i.e., Dolby or DTS digital
signals).
r
Speaker Output: Connect the left and right speaker cables to the output terminals. In order to
avoid shorting out the DDA-100, before turning on the power, please make sure that the polarity
of the speaker cables is properly terminated to the loudspeakers and the DDA-100
r
Inputs:
The DDC-100 provides for connecting up to four digital sources. They are selected in the following
order:
Input C1 - Coaxial
Input U2 - USB
Input O3 – Optical Input #3
Input O4 – Optical Input #4
To select the desired input, simply press the Input button it cycles through all 4 inputs sequentially.
Содержание DDA-100
Страница 1: ...NuForce DDA 100...