10
382 South Abbott Ave, Milpitas, CA 95035, USA • www.nuforce.com
EMAIL: [email protected]
2.
Pairing the headset with Bluetooth devices
How to enter pairing mode
Function
Operation
LED
indicator
Indication
tone
Enter
pairing
mode
Make sure that the
headset is off. Press
and hold
MFB
button
for 7-8 seconds and
release when the red
and blue LEDs flash
alternately
Red and
blue LEDs
flash
alternately.
Two short
“DU” tones
Remark:
The Pairing Mode will last two minutes. If no devices are
connected after two minutes, the standby mode returns
automatically.
Pairing the headset with a Bluetooth mobile phone
Prior to using the headset for the first time, you have to pair it with a
Bluetooth-enabled mobile phone. The pairing procedures are
dependent on different models of mobile phones. Please refer to
your mobile phone user’s manual for information. The general
pairing procedures are as follows:
1)
Place the headset and Bluetooth mobile phone no more than
one meter apart.
2)
Enter the headset’s pairing mode (please refer to “How to enter
pairing mode”).
3)
Activate your mobile phone’s Bluetooth function and set your
mobile phone to search for Bluetooth devices within range, and
select “BT-860” from the list of devices shown.
