NuForce AVP-18, Дополнительные инструкции, Страница: 10 / 11

Auto Room Correction. Running auto room EQ multiple times can result in errors on subsequent Auto EQ passes. This is because the Auto EQ test
stacks new results over the previously stored room parameters.
When running Auto Room Correction/EQ, make sure you finish the entire routine for all speakers and SAVE the settings.
To re-run the Auto Room Correction, go to
Menu > Setup > Load Default to clear out all previous stored settings.
Turn Off AVP-18, wait 30 seconds, then power it on again. Now you can re-run Auto EQ.
What is a calibrated mic and how can I utilize it?
Nuforce provides an optional calibrated mic, each with its own serial number and matching characteristic response file which specifically allows the
AVP-18 user or AV installer/dealer to insert the calibrated mic response curve into the AVP-18 for a more precise room measurement. NOTE: The
calibrated mic is not to be confused with the standard included microphone that for most part is more than sufficiently accurate.
The calibrated mike is available for purchase directly from NuForce or a NuForce dealer. To utilize the calibrated mic, please download the latest
firmware and installation software.