1.
Click the icon ‘Voice Over IP’ on the toolbar on the left side of the
page; the ‘Voice Over IP’ configuration screen opens.
2.
Click tab ‘Line Settings’. If you only have a single number, disable line
2 by unchecking the ‘2’ checkbox and click ‘Apply’.
3.
Click the ‘Action’ icon on the right of line 1; the ‘Line Settings’ screen
opens. Use the configuration values provided by your ISP to configure
the parameters in this screen.
4.
Click tab ‘Signaling Protocol’ and check the box ‘Use SIP Proxy’.
5.
Define the field ‘Proxy IP Address or Host Name’ of the ISP’s SIP
proxy, provided by the ISP.
6.
Press ‘OK’ or ‘Apply’ to complete the VoIP configuration.
Check that the MP-202 was successfully registered by clicking
‘System Monitoring’ > tab ‘Voice over IP’; entry ‘SIP Registration’
should indicate ‘Registered’ for the line(s) you configured.
7.
Pick up the phone receiver and listen for the dial tone; you’re now
ready to place an outgoing call.
All your settings are saved in the MP-202’s non-volatile memory.
From now on, you won’t need the PC to make VoIP calls.
Notice
This guide describes installation of Nuera MP-202 Telephone Adapter.
Information contained in this document is believed to be accurate and reliable at
the time of printing. However, due to ongoing product improvements and
revisions, Nuera cannot guarantee accuracy of printed material after the Date
Published nor can it accept responsibility for errors or omissions. Updates to this
document and other documents can be viewed by registered Technical Support
customers at
www.nuera.com
.
© Copyright 2006 Nuera Ltd. All rights reserved.
This document is subject to change without notice. Refer to the current release
notes that may be included with your documentation or hardware delivery.
Date Published: Sep-04-2006
Date Printed: May-07-07
To download this Guide and other documentation, go to
www.nuera.com/downloads
www.nuera.com
MP-202 Telephone Adapter
Quick Installation Guide
Document #: 299-452-202
