NuDAQ PCI-6308 Series, Руководство пользователя

Страница: 20 / 37

12
•
Installation
The PCI-6308‘s voltage output channels can be configured as different
voltage range. Each output channel and its corresponding jumpers are
listed as follow.
Channel
NO.
Corresponding Jumper
For output mode
(Unipolar/Bipolar)
Corresponding Jumper
For reference voltage
sources (external/internal)
CH0 JP1 JP9 JP11
CH1 JP2 JP9 JP11
CH2 JP3 JP9 JP11
CH3 JP4 JP9 JP11
CH4 JP5 JP10 JP12
CH5 JP6 JP10 JP12
CH6 JP7 JP10 JP12
CH7 JP8 JP10 JP12
The output range is dependent on D/A converter's reference voltage
source and output mode (Bipolar or Unipolar). The JP11 and JP12 are
used to set reference voltage sources comes internally or externally.
The external reference voltage input (ExtVref) is on the connector CN1.
The JP1~8 and JP9/10 set the output mode to be unipolar or bipolar.
The different output ranges of output CH0 are shown as the following
table. The settings for reminder channels(CH1 ~ CH7) should follow
the same rules as CH0. The example setting of CH0 is shown the
Table 2.1.
Output Range JP1 JP9 JP11
-10V to +10V
Bipolar
(Default)
0V to +10V
Unipolar
0V to ExtRef
Voltage
Unipolar
Table 2.1 Example setting of CH0
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3