2.4 Installation of the Program: Via modem
The following is for installing the program with the modem currently
installed: If not see section 2.3
Step 1:
Connect all hardware
a. Plug in the power cord to the server to a wall socket
b. Connect all cameras to the BNC connectors on the webcam
server.
Note: if you are connecting to a camera switch make sure
the four white (DIP) switches, on the outside next to the
BNC connectors, are in the up position. See section 1.5
c. Plug in a 9 pin connector to the webcam server and connect to
a modem and plug the modem into a phone jack (RJ-11)
d. Turn on the webcam server via power button.
S-1
S-2
S-4
S-3
Internet
Relay
Modem:
to RJ-11:
phone jack
Installation: Diagram
Step 2:
From Microsoft window click on
“My Computer”
Step 3:
click on “
Dial-up Networking”
DMP-7300 Webcam Server User's Manual: Version 1.2
16
